DVCAM Master Series Digital Videocassette Recorder w/i.LINK interface. The DSR-1800A has i.LINK interface as standard signal input/ouput. i.LINK interface includes audio unlock/lock function--when an unlocked audio signal in a DV recording (10 micron) is input via the i.LINK connector, or played back in a DV recording, this new A version Master Series VTR will automatically transform it to a locked audio signal which is defined as the standard of the DVCAM format to ensure frame-accurate editing. Two major features of the DSR-1800A is the built-in jog/search dial and its multiple format playback capability of DV (SP only) and DVCPRO 25. This unit has the ability to automatically accommodate all 25 Mbps cassette sizes, and does not require a cassette adapter or menu setting changes for playback of these formats.

The DSR-1800A also has a full range of both analog and digital interfaces. The availability of the SDI interface ensures a migration path to Digital Betacam, Betacam SX and SDI-based systems. The SDTI (QSDI) interface enable a quality deterioration-free transfer between the DSR-1800A and DV compression-based systems.
i.LINK interface as standard signal input/ouput.
i.LINK interface includes audio unlock/lock function
DVCAM Digital Component Recording Format
PCM Digital Audio
Playback Compatibility with DV (25 Mbps) Formats
Triple-positioning Cassette Compartment
Built-in Jog/Shuttle Dial
Digital Slow Motion and Jog Sound
Frame Accurate Editing
Audio Editing Capabilities
DMC (Dynamic Motion Control)
VITC Time Code
Built-in Signal Generator
Universal Powering System
Auto Repeat Function 
 

DVCAM Digital Component Recording Format
 The DVCAM format uses 8-bit digital component recording with a 5:1 compression ratio and a sampling rate of 4:1:1. The DV compression algorithm provides excellent picture quality and superb multigenerational performance. 
PCM Digital Audio
 The DSR-1800A provides excellent PCM digital audio performance with a wide dynamic range and an excellent signal-to-noise ratio. There are two selectable audio recording modes: 2CH mode with 48 kHz/16-bit or 4CH mode with 32 kHz/12-bit. 
Playback Compatibility with DV (25 Mbps) Formats
 The DSR-1800A offers excellent playback compatibility with DV family formats (25Mbps). The DV family formats include DVCAM, DV (SP mode only) and DVCPRO 25*. These tapes can be played back and utilized directly as editing materials with +/-0 Frame accuracy.
*Playback signal of DVCRO recorded tape is not available via SDTI(QSDI) and i.LINK interfaces. 
Triple-positioning Cassette Compartment
 Triple-positioning cassette compartment automatically accepts DVCPRO M-size cassette tapes in addition to standard and mini size cassette tapes of DV, DVCAM and DVCPRO. Cassette insertion is done without the need for an external adapter, or the need to set the playback format mode before use. 
Built-in Jog/Shuttle Dial
 A highly responsive Jog/Shuttle dial is built in on the front panel. This feature is ideal for searching for desired edit points. 
Digital Slow Motion and Jog Sound
 The DSR-1800A offers a variable speed playback function with a range of -0.5 to +0.5 times normal speed. Play back of digital noiseless slow motion pictures and jog sound is also possible within this range. This enables the fast and accurate locating of edit pointson the tape. This feature is available for all DV (25Mbps) format recorded tapes. 
Frame Accurate Editing
 The DSR-1800A is equipped with an RS-422A remote control connection to interface with the other compatible equipment. 
Audio Editing Capabilities
 Audio cross-fade function is available for noiseless audio transitions at editing points. Audio mix/swap and voice-over functions are possible without any delay between the video and studio signals. In addition, all four audio channels can be edited independently, which is applicable in creating or editing video material in multiple languages, or implementing multiple audio sources. 
DMC (Dynamic Motion Control)
 By utilizing a DMC-capable editing controller, the DSR-1800A can vary the playback speed for a certain section of a tape in the range of -0.5 to +0.5 times normal speed. Segments can be stored in memory for playback at the same speed. NOTE: DMC is not available through i.LINK and SDTI(QSDI) due to minute speed video data processing capability. 
Clip Link Operation
 By integrating the DSR-1800 into a non-linear editing (NLE) system which supports ClipLink operation, the VTR is able to send ClipLink information data onto the NLE unit, providing great efficiency throughout the editing process. 
Process Control (Video Control)
 The DSR-1800A is equipped with Process Control for both analog and digital outputs in order to obtain highly stable video signals. With Process Control, the video level, chroma level, hue, Y/C delay Sync phase, SC phase and Set up (black) for composite, S-video, component and SDI outputs can be controlled through the VTR menu. These features can also be adjusted from an external TBC remote controller through Video Control port (D-sub 15-pin) on the rear panel. 
VITC Time Code
 The DSR-1800A supports time code in the sub code area on a tape, and also VITC through all video signal interfaces. This time code is recorded on the video tracks. VITC output is achieved by inserting the signal into the vertical-blanking interval. The time code in sub code area can also be output as VITC. 
Channel Condition Monitoring
 The DSR-1800A has a three-color channel condition indicator, with each color representing a particular error rate threshold level. This function enables operators to quickly recognize the condition of a VTR or tape for more reliable editing operation. 
Built-in Signal Generator
 The DSR-1800A is equipped with a built-in signal generator, which can generate color bars or black burst for video, and 1 kHz tone or mute signal for audio. This is very convenient for creating pre-striped tapes before editing. 
Universal Powering System
 The DSR-1800A is equipped with a universal powering system that can accommodate AC 100V to 240V, 50 or 60 Hz . A built-in regulator switches the unit to the appropriate voltage automatically. This allows the DSR-1800A to be used worldwide without the need for a transformer. 
Auto Repeat Function
 Auto repeat function is available through the VTR menu. Time code can also be set as start and stop points. 
 
Power requirements   AC 100-240V, 50/60 Hz
Power consumption   Approx. 100 W
Dimensions (WxHxD)   16 7/8" x 7 x 19 5/8 inches
Weight   28 lb. 10 oz 
Operating temperature   32°F to 104°F
Storage temperature   -4°F to 140°F
Operating relative humidity   Less than 80%
Storage relative humidity   Less than 90%

OPTIONAL ACCESSORIES
Model Name Description U.S. List Price
CCF3L Firewire Cable for 6 pin / 6 pin for iLink $141.00
CCFD3L Firewire Cable for 4 pin / 6 pin for iLink $141.00
RCC10G/US RS-422 Cable $167.00
RCC30G/US 30 Meter (100 ft) RS-422 Cable $290.00
RCC5G/US RS-422 Cable $140.00
DSBK1801 SDI/AES/EBU I/O Board for the DSR-1800 $1,470.00
DSRM10 Wired Control-S Remote Control Unit $380.00

For Current Pricing and Availability:
CALL 800-843-3679
or EMAIL: