The AT804 is deal for interviews, sportscasting and for use as the “mono” mic in conjunction with a stereo microphone. Its omnidirectional polar pattern provides natural reproduction of surrounding ambience. The mic’s rugged housing with hardened-steel grille stands up to field use; its internal shock mounting minimizes handling and cable noise. Ideal for interviews, sportscasting and as the "mono" mic when used in conjunction with a stereo microphone Rugged die-cast case with hardened steel grille stands up to field use Omni pattern provides natural reproduction of surrounding ambience Plugs directly into an XLRF-type surface or cable connector
ELEMENT Dynamic POLAR PATTERN Omnidirectional FREQUENCY RESPONSE 50-15,000 Hz OPEN CIRCUIT SENSITIVITY -49 dB (3.5 mV) re 1V at 1 Pa IMPEDANCE 600 ohms WEIGHT 7.5 oz (213 g) DIMENSIONS 5.94" (151.0 mm) long, 1.42" (36.0 mm) head diameter OUTPUT CONNECTOR Integral 3-pin XLRM-type ACCESSORIES FURNISHED AT8405a stand clamp for 5/8"-27 threaded stands; soft protective pouch AUDIO-TECHNICA CASE STYLE S8
AT813a
The AT813a is ideal for close-up interviews, vocals, overheads, piano, and strings. Its cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source. The mic’s proximity effect provides added warmth when used close up. Features include a large protective screen that reduces “popping” and sibilant distortion. It operates on battery or phantom power. Ideal for close-up vocals, overheads, piano and strings Sound is similar to far more expensive studio microphones Low-mass diaphragm ensures minimum distortion Cardioid pattern provides added warmth when used close up Operates on battery or phantom power
ELEMENT Fixed-charge back plate, permanently polarized condenser POLAR PATTERN Cardioid FREQUENCY RESPONSE 30-20,000 Hz OPEN CIRCUIT SENSITIVITY Phantom: -44 dB (6.3 mV) re 1V at 1 Pa Battery: -45 dB (5.6 mV) re 1V at 1 Pa IMPEDANCE Phantom: 200 ohms Battery: 270 ohms MAXIMUM INPUT SOUND LEVEL Phantom: 137 dB SPL, 1 kHz at 1% T.H.D. Battery: 123 dB SPL, 1 kHz at 1% T.H.D. DYNAMIC RANGE (typical) Phantom: 113 dB, 1 kHz at Max SPL Battery: 99 dB, 1 kHz at Max SPL SIGNAL-TO-NOISE RATIO 70 dB, 1 kHz at 1 Pa PHANTOM POWER REQUIREMENTS 9-52V DC, 2 mA typical BATTERY TYPE 1.5V AA/UM3 BATTERY CURRENT / LIFE 0.4 mA / 1200 hours typical WEIGHT 7.1 oz (200 g) DIMENSIONS 7.60" (193.0 mm) long, 1.98" (50.3 mm) head diameter OUTPUT CONNECTOR Integral 3-pin XLRM-type ACCESSORIES FURNISHED AT8405a stand clamp for 5/8"-27 threaded stands; battery; soft protective pouch AUDIO-TECHNICA CASE STYLE S7
ATM410
This cardioid dynamic workhorse is designed for smooth, natural vocal reproduction and low noise. Equipped with a neodymium magnet for high output, and a multi-stage grille design for excellent protection against plosives, this super-durable microphone is built to stand up to life on the road. Its cardioid polar pattern reduces pickup of sounds from the sides and rear, maximizing isolation from other sound sources and minimizing feedback. Tailored for smooth, natural vocal reproduction Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source Durable performance for professional applications Hi-ENERGY® neodymium magnet for improved output and transient response Excellent off-axis rejection for minimum feedback Superior anti-shock engineering for low handling noise Multi-stage grille design offers excellent protection against plosives and sibilance without compromising high-frequency clarity Quiet-Flex™ stand clamp provides silent, flexible microphone positioning Corrosion-resistant contacts from gold-plated XLRM-type connector Rugged, all-metal design and construction for years of trouble-free use
ELEMENT Dynamic POLAR PATTERN Cardioid FREQUENCY RESPONSE 90-16,000 Hz OPEN CIRCUIT SENSITIVITY –55 dB (1.7 mV) re 1V at 1 Pa IMPEDANCE 300 ohms WEIGHT 233 g (8.2 oz) DIMENSIONS 170.0 mm (6.69") long, 53.5 mm (2.11") diameter OUTPUT CONNECTOR Integral 3-pin XLRM-type ACCESSORIES FURNISHED AT8470 Quiet-Flex™ stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch AUDIO-TECHNICA CASE STYLE T6
ATR20
This attractively priced handheld dynamic mic is tuned for clear vocal and instrument reproduction and consistent performance. Its cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source and protecting against feedback. Designed especially for both vocal and instrument miking Cardioid polar pattern rejects undesirable off-axis sound and background noise Permanently-attached 16.5' (5 m) cable terminated with a 3.5 mm mini-plug for use with home or portable recording systems Conveniently-located on/off switch Includes 1/4" (6.35 mm) plug adapter and desk stand
ELEMENT Moving coil dynamic POLAR PATTERN Cardioid FREQUENCY RESPONSE 80 - 12,000 Hz OPEN CIRCUIT SENSITIVITY -59 dBm +/- 3 dB, 1 kHz at 1 Pa IMPEDANCE 500 ohms +/- 30% WEIGHT 5.3 oz (150 g) CABLE 16.5' (5.0 m)
ATR30
This ruggedly built dynamic mic provides full-sounding professional pickup for both vocals and instruments. The ATR30’s unidirectional polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source. Its conveniently located switch provides the performer with easy access to on/off control. The mic’s proximity effect provides added warmth when used close up. Professional sound quality for vocals and instruments Unidirectional polar pattern reduces pickup of undesired off-axis sounds Proximity effect provides enhanced low-end response when used close up Rugged metal construction is great for touring and on-stage use Conveniently-located on/off switch Includes stand clamp and detachable 16.5' (5 m) cable (XLR to 1/4" (6.35 mm) phone plug
ELEMENT Moving coil dynamic POLAR PATTERN Cardioid FREQUENCY RESPONSE 60 - 15,000 Hz OPEN CIRCUIT SENSITIVITY -57 dBm +/- 3 dB, 1 kHz at 1 Pa IMPEDANCE 500 ohms +/- 30% WEIGHT 10.0 oz (284 g) without cable CABLE 16.5' (5.0 m)
ATR50
The versatile ATR50 dynamic microphone provides full-sounding professional pickup for both vocals and instruments. A popular choice for on-stage performance, its unidirectional polar pattern allows the mic to focus on the desired sound location, while controlling feedback. Its conveniently located switch provides the performer with easy access to on/off control. The mic’s proximity effect provides added warmth when used close up. Well-suited for on-stage vocal/instrument use as well as for the karaoke enthusiast Rugged metal construction Unidirectional polar pattern reduces pickup of undesired off-axis sounds Proximity effect provides enhanced low-end response when used close up Conveniently-located on/off switch Includes stand clamp and detachable 15' (4.6 m) cable (XLRF to XLRM)
ELEMENT Moving Coil Dynamic POLAR PATTERN Unidirectional FREQUENCY RESPONSE 70 - 14,000 Hz OPEN CIRCUIT SENSITIVITY -55 dBm +/- 3 dB, 1 kHz at 1 Pa IMPEDANCE 500 ohms +/- 30% WEIGHT 9.5 oz (270 g) without cable CABLE 15.0' (4.6 m)
ES973
The ES973 is a high-quality hypercardioid condenser designed for use as a handheld, stand or lectern vocal microphone. The microphone’s rugged housing contains all electronics; it is equipped with a 3-pin XLRM-type output connector. The microphone requires 11-52V DC phantom power. Optional interchangeable elements are available for coverage from 100° to 170°. Designed for quality sound reinforcement with smooth, accurate audio reproduction in handheld and fixed-mount applications Uniform hypercardioid polar pattern with 100º acceptance angle Available interchangeable elements permit angle of acceptance from 100º to 170º High sensitivity and high SPL capability Rugged design and construction for reliable performance
ELEMENT Fixed-charge back plate, permanently polarized condenser POLAR PATTERN Hypercardioid FREQUENCY RESPONSE 80-15,000 Hz OPEN CIRCUIT SENSITIVITY -41 dB (8.9 mV) re 1V at 1 Pa IMPEDANCE 250 ohms MAXIMUM INPUT SOUND LEVEL 144 dB SPL, 1 kHz at 1% T.H.D. DYNAMIC RANGE (typical) 117 dB, 1 kHz at Max SPL SIGNAL-TO-NOISE RATIO 67 dB, 1 kHz at 1 Pa PHANTOM POWER REQUIREMENTS 11-52V DC, 4 mA typical WEIGHT 5.4 oz (154 g) DIMENSIONS 6.15" (156.1 mm) long, 1.48" (37.7 mm) head diameter OUTPUT CONNECTOR Integral 3-pin XLRM-type ACCESSORIES FURNISHED AT8405a stand clamp; AT8122 windscreen; protective pouch AUDIO-TECHNICA CASE STYLE S2
PRO31
This affordable cardioid dynamic microphone is designed for close-up vocal performance. The PRO 31 offers a broad frequency response and low handling noise in a tough, durable design that delivers consistent performance on the road. The mic sets price/performance standards for intelligibility, transparent sound quality and noise suppression. Available in two models for easy use with consumer and pro electronics: PRO 31 (XLRF-XLRM cable) and PRO 31QTR (XLRF- ¼” cable). Close-up vocal performance microphone sets price/performance standards for intelligibility, transparent sound quality and noise suppression Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source Hi-ENERGY® neodymium magnet for high output and articulate vocal reproduction Two-stage ball-type headcase for superior "pop" protection MagnaLock™ on/off switch Corrosion-resistant contacts from gold-plated XLRM-type connector Rugged design and construction for reliable performance
ELEMENT Dynamic POLAR PATTERN Cardioid FREQUENCY RESPONSE 60-13,000 Hz OPEN CIRCUIT SENSITIVITY -55 dB (1.7 mV) re 1V at 1 Pa IMPEDANCE 600 ohms SWITCH MagnaLock™ on/off WEIGHT 11.0 oz (312 g) DIMENSIONS 7.28" (185.0 mm) long, 2.09" (53.1 mm) head diameter OUTPUT CONNECTOR Integral 3-pin XLRM-type CABLE 15.0' (4.5 m) cable with XLRF-type connector at microphone end, XLRM-type connector at equipment end ACCESSORIES FURNISHED AT8470 Quiet-Flex™ stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch AUDIO-TECHNICA CASE STYLE T1
PRO41
This cardioid dynamic step-up is built to survive the realities of day-to-day use and still produce clear, full-range vocal reproduction every time. Its superior internal shock mounting reduces handling noise. The microphone’s cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source. Natural, full-range vocal reproduction; ideal for close-up vocal use in performance Superior internal shock mounting reduces handling noise Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source Hi-ENERGY® neodymium magnet for articulate vocal reproduction Two-stage ball-type headcase for superior "pop" protection MagnaLock™ on/off switch Corrosion-resistant contacts from gold-plated XLRM-type connector Rugged design and construction for reliable performance
ELEMENT Dynamic POLAR PATTERN Cardioid FREQUENCY RESPONSE 90-16,000 Hz OPEN CIRCUIT SENSITIVITY -55 dB (1.7 mV) re 1V at 1 Pa IMPEDANCE 300 ohms SWITCH MagnaLock™ on/off WEIGHT 10.7 oz (304 g) DIMENSIONS 7.28" (185.0 mm) long, 2.09" (53.1 mm) head diameter OUTPUT CONNECTOR Integral 3-pin XLRM-type CABLE 15.0' (4.5 m) cable with XLRF-type connector at microphone end, XLRM-type connector at equipment end ACCESSORIES FURNISHED AT8470 Quiet-Flex™ stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch AUDIO-TECHNICA CASE STYLE T1
PRO61
The premier Pro Series vocal microphone delivers excellent gain before feedback and outstanding stage presence for lead and back-up vocals. With its extended frequency response, the PRO 61 provides optimal clarity and smooth, natural sonic characteristics. Its hypercardioid polar pattern improves isolation of the sound source. The mic’s superior internal shock mounting reduces handling noise, and its two-stage ball-type headcase delivers superior “pop” protection. Premier Pro Series vocal microphone delivers excellent gain before feedback and outstanding stage presence for lead and back-up vocals Extended frequency response provides optimal clarity and smooth, natural sonic characteristics Hypercardioid polar pattern improves isolation of desired sound source Superior internal shock mounting reduces handling noise Hi-ENERGY® neodymium magnet for articulate vocal reproduction Two-stage ball-type headcase for superior "pop" protection Corrosion-resistant contacts from gold-plated XLRM-type connector Rugged design and construction for reliable performance
ELEMENT Dynamic POLAR PATTERN Hypercardioid FREQUENCY RESPONSE 70-16,000 Hz OPEN CIRCUIT SENSITIVITY -55 dB (1.7 mV) re 1V at 1 Pa IMPEDANCE 300 ohms WEIGHT 11.8 oz (335 g) DIMENSIONS 7.56" (192.0 mm) long, 2.07" (52.6 mm) head diameter OUTPUT CONNECTOR Integral 3-pin XLRM-type CABLE 15.0' (4.5 m) cable with XLRF-type connector at microphone end, XLRM-type connector at equipment end ACCESSORIES FURNISHED AT8470 Quiet-Flex™ stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch AUDIO-TECHNICA CASE STYLE T4
For Current Pricing and Availability: CALL 800-843-3679 or EMAIL:
Audio 
MENU 
